Sailaways
Trinity marinas are able to supply 2 types of sailaways, thereby offering you excellent choice. Our basic specifications and price guides are listed below, however, we are able to tailor any of our sailaways to meet your particular requirements and quote accordingly.
Sailaway Specifications
Felix 1 - Unlined sailway
The advantage of an unlined sailaway is that the bulkheads are not in place giving you total flexibility to design the space to your requirements throughout the build process. If you are certain on your design then, Felix 2 our lined sailaway may be a better option as this comes with bulkheads and wiring loom. See further down the page for full specification:
Hull
Built on a JD Narrowboats hull who have built a large number of shells for experienced narrowboat cruisers and narrowboat novices alike. At the Crick Boat Show in 2005 their shell was highly rated for thickness of the steel, solid construction, welding quality and finish.
Guide Price
Guide price for 57ft £29,250 inc VAT( price subject to change please call for an accurate price) for a trad or cruiser stern with the following specfication. Add £875 inc VAT for a semi-trad. We can build any length of narrowboat from 40 to 70ft.
Specification
Fully sealed hull
Steel 10/6/5/4
Steel glazed front doors, steel side and rear doors, with sliding hatch
Chrome windows, mushrooms and sunken fenders or brass windows, mushrooms and gold windows
Battened and sprayfoamed
25mm marine ply floor
Engine room and gas locker finished with grey gloss
Beta engine 38hp, with twin alternator
Starter and leisure batteries
Anodes front and rear
2 coats of paint and hull blacked
Electrical confirmity
Felix 2 - Lined Sailaway
The advantage of the lined sailaway is that you are immediately at stage 2 of your build, enabling you to fix final wall and ceiling finishes directly to the bulkheads. Wiring loom is also installed leaving you only 2nd fix electrics to contend with.
Hull
Built on a JD Narrowboats hull who have built a large number of shells for experienced narrowboat cruisers and narrowboat novices alike. At the Crick Boat Show in 2005 their shell was highly rated for thickness of the steel, solid construction, welding quality and finish.
Guide Price
Guide price for 57ft £33,500 inc VAT( price subject to change, please call for an accurate price) for a trad or cruiser stern with the following specfication. Add £875 inc VAT for a semi-trad. We can build any length of boat from 40 to 70ft.
Specification
as the unlined plus.....
Lined out in 9mm ash or oak faced ply
Bulkheads, 18mm solid block A boards, faced with ash or oak on both sides
Wiring loom ready to connect
135 gallon stainless steel water tank
For information on build slots contact our sales team on 01455 896820
Sailaway Recreational Craft Directive
All craft built after 16th June 1998 must have an RCD. If you are planning to do a self fit you must follow the Recreational Craft Directive guidelines as set out on the Canal Boatbuilders website. We also strongly recommend that you retain an independent surveyor to take you through this process.
Please click RCD to gain a direct link to these guidelines.
